Barcodes

Barcodes can be assigned to standard lines, allowing them to be scanned and sold directly at the point of sale terminal. This is particularly useful in retail environments to enhance speed and efficiency of service.

Adding Single Barcodes

Follow these steps to add single barcodes to standard lines:

1. Find the required standard line from the product list using search or product type filters

2. Select the Barcodes tab

3. Click Add

4. Enter the required Barcode

   If the barcode is a custom priced set the check box and the barcode must start with a 2 and be of 3 digits

   Additionally to enable custom priced barcodes the standard line must be set as Open Priced

   Custom priced barcodes are where the barcode itself will contain the price and pass this information to the point of sale terminal upon scanning

5. Click OK

6. Continue adding barcodes as required

Deleting Single Barcodes

Follow these steps to delete a barcode:

1. Select the Barcode from the list

2. Click Delete

3. Click Yes to confirm the deletion

Adding Barcode Ranges

Follow these steps to add barcodes ranges to standard lines:

1. Find the required standard line from the product list using search or product type filters

2. Select the Barcodes tab

3. Click Edit Barcode Range

   

4. Click Add

   

5. Enter the Range Name | Start and End Barcodes

6. Click OK

7. Continue adding ranges as required

8. If there any exceptions where a specific barcode is not accepted within the exceptions section click Add enter the required barcodes comma separated and click OK

9. Click Close

Additional Information

When working with barcodes the following additional settings can be applied in Theme Modelling:

• Add the 'Type Barcode Button' to Theme Panel Designs / Shared Panels so that if the barcode will not scan the button can be tapped and manually enter the barcode to complete the sale

  The button can be found in the Button Picker → Functions → Ordering

• If there are many products and adding them to theme panel designs would be a large overhead a setting can be enabled to send all barcoded products to the terminal without having to add them to the theme

  Theme Modelling → Estate Setup → Config Sets → Send All Barcoded Products

  Caution should be taken when enabling this feature as it can dramatically increase the theme size sent to point of sale terminals, where this setting is needed create a specific config set for required terminals